CF-I XTW WD Extreme-Weather Foam Sealant
Extreme-weather insulating foam ideal for sealing door and window joints throughout the year.
CF-I XTW is Hilti's extreme-weather polyurethane foam for sealing, insulating and filling door and window joints. It applies between -15 and 35 °C and yields up to 1.9 cubic feet. Call the counter to confirm today's size, colour and price.
Hilti's CF-I XTW is an extreme-weather polyurethane foam for sealing door and window joints through the year. It guns between -15 and 35 °C, which is the widest application range of the three Hilti foams Cranco carries, and yields up to 1.9 cubic feet.
It is tack free in about 10 minutes, cuttable in about 25, and holds from -40 to 80 °C once cured. Cranco carries Hilti at Concord, Barrie and Mississauga. Call the branch to confirm the colour and size in stock, and the price.
FEATURES AND BENEFITS
- More reliable over a wide temperature range.
- Precise dispensing and volumetric control.
- Acts as thermal insulation.
- Seals, insulates and fills.
- Acoustic insulation – shutter boxes, cooling and heating lines, wood floors, insulation panels, air conditioning and ventilation channels.
- Insulating window and door joints.
What is Hilti CF-I XTW used for?
Insulating window and door joints, and sealing, insulating and filling generally. Hilti also lists acoustic insulation work: shutter boxes, cooling and heating lines, wood floors, insulation panels, and air conditioning and ventilation channels.
How cold can you apply Hilti CF-I XTW?
Down to -15 °C, and up to 35 °C. Hilti's CF 812 WD starts at 5 °C and its CF-AS CJP at 0 °C, so this is the can for a winter site. Cured, it holds from -40 to 80 °C.
How fast does Hilti CF-I XTW cure?
Tack free in about 10 minutes at 74 °F and 50% relative humidity, and cuttable in about 25 minutes at 23 °C and the same humidity.
How much does one can of Hilti CF-I XTW fill?
Up to 1.9 cubic feet, the largest yield of the three Hilti foams Cranco carries. Call the branch to confirm the can size available today.
Does Hilti CF-I XTW give volumetric control?
Cranco's catalogue says precise dispensing and volumetric control, and that the foam is more reliable over a wide temperature range. On a window joint that matters, because an over-filled bead is the one that bows the frame.
Is Hilti CF-I XTW a fireblock foam?
Hilti publishes no fireblock standard or approval for CF-I XTW. For a residential fireblock listing, CF-AS CJP carries one and this foam does not.
Where can you buy Hilti CF-I XTW?
At Cranco's counters in Concord, Barrie and Mississauga. Hilti makes it in manila. The addresses, phone numbers and hours are further down this page.
Branches
Call the branch to confirm what it has in stock today, and the price.
Data sheet
- Hilti CF-I XTW data sheet Hilti, PDF