SoudaFoam All Season Cold Weather Professional Foam

SoudaFoam All Season is a top of the line one component, moisture curing polyurethane foam developed especially to perform under difficult freezing temperature conditions or in hot conditions where traditional PU foams fail to extrude and cure.

SoudaFoam All Season Cold Weather Professional Foam is a polyurethane foam from Soudal. Soudal lists it for installing window and door frames, filling cavities, sealing openings in roof construction. Soudal gives the application temperature as extrudes -13°F to 120°F ambient; can temperature 41°F to 95°F, which the product and the surface both have to meet on the day. Cranco carries it, and which counter has it on the day changes, so ask at the counter.

Soudafoam All Season is Soudal's one-component moisture-curing polyurethane foam for freezing weather. It extrudes at ambient temperatures from -13 to 120 °F with a can between 41 and 95 °F, skins in 8 minutes, is dust free after 20 to 25, and holds from -40 to 194 °F once cured.

It meets ASTM C1620, UL 723, UL 1715 and ASTM E84, adheres to most substrates apart from PTFE, polyethylene and polypropylene, and neither shrinks nor post-expands. Cranco carries Soudal at Concord, Barrie and Mississauga. Call the branch to confirm the colour and size in stock, and the price.

A can of Soudafoam All Season polyurethane foam

FEATURES AND BENEFITS

  • Excellent adhesion on most substrates (except PTFE, PE and PP).
  • High thermal and acoustical insulation.
  • Does not slump at low temperatures.
  • Can be applied at frost temperatures.
  • Low moisture absorption.
  • No shrinkage.

What is Soudafoam All Season used for?

Installing window and door frames, filling cavities, sealing openings in roof construction, building a soundproof screen, connecting insulating materials to roof construction, laying a soundproofing layer on motors, and improving thermal insulation in cooling systems. Soudal says it adheres to most substrates apart from PTFE, polyethylene and polypropylene.

How cold can you apply Soudafoam All Season?

The foam extrudes at ambient temperatures as low as -13 °F (-25 °C). Soudal sets both the can and application surface range at 41 to 95 °F, recommends 50 to 77 °F, and gives 41 to 86 °F as the recommended ambient range. Once cured, the foam holds from -40 to 194 °F.

How fast does Soudafoam All Season cure?

It skins in 8 minutes and is dust free after 20 to 25 minutes at 68 °F and 65% relative humidity. Full cure runs 1.5 hours at 68 °F, 3 to 5 hours at 32 °F, 8 to 10 hours at 14 °F and 10 to 12 hours at -13 °F, so a winter joint is not ready to trim on the same schedule as a summer one.

How much does one can of Soudafoam All Season fill?

Soudal's headline is 12 gallons of cured foam from a 24 ounce can under ASTM C-1536. Its own temperature table runs from 13 gallons at 68 °F down to 8 at 32 °F, 7 at 14 °F and 6 at -13 °F. Plan the can count off the temperature the crew will be working in.

Do you have to cover Soudafoam All Season?

Yes. Soudal's remark is that cured PU foam must be protected from ultraviolet radiation by painting it or applying a top layer of sealant, and it names silicone, MS polymer, acrylic and PU sealant as the coverings. Paint is a protective coat on this product and Soudal publishes no paintability specification.

How long does Soudafoam All Season keep?

Eighteen months in unopened packaging, in a cool dry place between 41 and 77 °F, stored with the valve pointing up. Soudal prints that last instruction on its own.

Where can you buy Soudafoam All Season?

At Cranco's counters in Concord, Barrie and Mississauga. Soudal makes it in champagne, in a 24 ounce aerosol can. The addresses, phone numbers and hours are further down this page.

Limitations from Soudal

Cured PU foam must be protected from UV-radiation by painting or applying a top layer of sealant (silicone, MS Polymer, acrylic and PU-sealant).

Can and surface temperature 41°F to 95°F (50°F-77°F recommended); the foam will even cure at ambient temperatures of 120°F (41°F-86°F recommended).

Foam Yield and Curing Time (temperature of can must be greater than 41°F):

Branches

Call the branch to confirm what it has in stock today, and the price.

Concord

255 Spinnaker Way, Unit #2, Concord, ON L4K 4J1

Counter details

Barrie

556 Bryne Drive, Unit #1, Barrie, ON L4N 9P6

Counter details

Mississauga

1122 Lorimar Drive, Unit B, Mississauga, ON L5S 1R8

Counter details

Data sheet

Back to Soudal