TremGlaze S1400
TremGlaze S1400 is a high-performance, single-component, neutral-cure, medium-modulus silicone sealant.
TremGlaze S1400 is a silicone sealant from Tremco. Tremco lists it for window, door. Tremco rates its movement capability at 40, which decides whether a moving joint is inside its range. Cranco carries it, and which counter has it on the day changes, so ask at the counter.
TremGlaze S1400 is Tremco's neutral-cure, medium-modulus silicone for perimeter caulking around windows, doors and frames on wood, brick and vinyl. It takes plus or minus 40% cyclic movement under ASTM C719, skins in 10 to 15 minutes, and is tack free in 30 to 40 minutes.
It conforms to TT-S-00230C Type II Class A, ASTM C920 Type S Grade NS Class 35 Use NT M A, CAN/CGSB 19.13-M87 and AAMA 802.3-16 Type II. Cranco carries Tremco at Concord, Barrie and Mississauga. Call the branch to confirm the colour and size in stock, and the price.
FEATURES AND BENEFITS
- Medium modulus with capability to handle up to 40% expansion and contraction, making it ideal for use in dynamically moving joints.
- Extremely low VOCs and can be used in any VOC regulated area across the US and Canada.
- Primerless adhesion for most construction materials reduces installation time.
- Comes ready to use with no mixing required for immediate application with conventional caulking equipment.
What is TremGlaze S1400 used for?
General perimeter caulking of windows, doors and frames, and residential installations in wood, brick and vinyl. Tremco's stated aim for it is a watertight seal at those perimeters.
How much movement does TremGlaze S1400 take?
Plus or minus 40% cyclic movement under ASTM C719, matched in this catalogue by Tremsil 400 and beaten only by Dymonic 100 at ±50%. Its ASTM C920 rating is Class 35. Tremco's own limitation is that it should not go in areas where movement requirements exceed ±50%.
How fast does TremGlaze S1400 skin?
It allows 10 to 15 minutes for tooling before the skin forms, and is tack free in 30 to 40 minutes under ASTM C679. Tremco publishes no full-cure figure for it on the sheet Cranco holds.
Is TremGlaze S1400 low VOC?
Tremco says extremely low VOCs, and that the sealant can be used in any VOC regulated area across the US and Canada. It publishes no gram-per-litre figure for it on the sheet Cranco holds.
Does TremGlaze S1400 need a primer?
Tremco says primerless adhesion for most construction materials, and gives the reason as reduced installation time. Where the substrate is unusual, Tremco's standing advice across this range is an adhesion test before the run.
What colours and sizes does TremGlaze S1400 come in?
The chart below shows sixteen colours. The product comes in 300 mL cartridges and 600 mL sausages. The colour chart and the data sheet are both linked at the foot of this page.
Can you use TremGlaze S1400 under water?
No. Tremco rules out continuous water immersion, structural glazing and tensile bead work, damp or contaminated surfaces, and says to apply it with adequate ventilation.
Where can you buy TremGlaze S1400?
At Cranco's counters in Concord, Barrie and Mississauga. The addresses, phone numbers and hours are further down this page.
Limitations from Tremco
Tremco: do not apply over damp or contaminated surfaces.
Tremco: always apply sealants using adequate ventilation.
Tremco: not intended for continuous water immersion.
Tremco: not intended for structural glazing or tensile bead applications.
Tremco: do not use in areas where movement requirements exceed ±50%.
Branches
Call the branch to confirm what it has in stock today, and the price.
Colours
Tremco publishes a colour range for this product, and the colour chart PDF is below.
Call the branch for the colour you need.
Data sheet and colour chart
- TremGlaze S1400 data sheet Tremco, PDF
- TremGlaze colour chart Tremco, PDF, the whole TremGlaze range