TremGlaze S500+
TremGlaze S500+ is a one-part, medium-modulus, neutral-curing, silicone sealant ideal for a wide variety of window and door glazing applications.
TremGlaze S500+ is a silicone sealant from Tremco. Tremco lists it for window and door glazing applications. Tremco rates its movement capability at 25, which decides whether a moving joint is inside its range. Cranco carries it, and which counter has it on the day changes, so ask at the counter.
TremGlaze S500+ is Tremco's one-part, medium-modulus, neutral-curing silicone for window and door glazing. It skins in 5 to 10 minutes, is tack free in under 2 hours under ASTM C679, and takes plus or minus 25% under the ASTM C719 Hockman cycle.
It conforms to AAMA 805.216 Group C, TT-S 00230C Class A, TT-S 001543A Class A, ASTM C920 Type S Grade NS use NT G A O and CAN/CGSB-19.13 M87. Cranco carries Tremco at Concord, Barrie and Mississauga. Call the branch to confirm the colour and size in stock, and the price.
FEATURES AND BENEFITS
- Low toxicity/heavy metal free.
- Protects polymer compositions.
- EPA registered.
What is TremGlaze S500+ used for?
Window and door glazing, across a wide range of installations. Tremco's own case for it is adhesion, performance and cure stability on demanding window and door work.
How much movement does TremGlaze S500+ take?
Plus or minus 25% under the ASTM C719 Hockman cycle, and Tremco makes it a limitation as well as a rating: it cannot be used in areas where movement requirements exceed +25%. Where the joint works harder, TremGlaze S1400 takes ±40%.
How fast does TremGlaze S500+ skin?
Five to ten minutes, which is the shortest skin time of the Tremco silicones Cranco carries, and tack free in under 2 hours under ASTM C679. Tremco publishes no full-cure figure for it on the sheet Cranco holds.
Is TremGlaze S500+ EPA registered?
Tremco lists EPA registered among its features, alongside low toxicity and heavy metal free, and says the sealant protects polymer compositions. No other sealant Cranco carries states an EPA registration.
Where should you not use TremGlaze S500+?
Tremco keeps it off wet or contaminated surfaces, says the surfaces should be clean and dry before the sealant goes on, and rules out confined areas without adequate ventilation and joints moving past +25%.
What colours and sizes does TremGlaze S500+ come in?
The colours depend on the pack. The 300 mL cartridge comes in clear and white. The 17 litre pail and the 189 litre drum are clear only.
Where can you buy TremGlaze S500+?
At Cranco's counters in Concord, Barrie and Mississauga. The addresses, phone numbers and hours are further down this page.
Limitations from Tremco
TremGlaze S500+ should not be used: On wet or contaminated surfaces. Surfaces should be clean and dry prior to sealant application. In confined areas, without adequate ventilation; In areas where movement requirements exceed + 25%
Branches
Call the branch to confirm what it has in stock today, and the price.
Colours
Tremco publishes a colour range for this product, and the colour chart PDF is below.
The chart below is the TremGlaze UA1300 colour chart. Tremco makes TremGlaze S500+ in clear and white in the cartridge, and clear in the pail and the drum.
Call the branch for the colour you need.
Data sheet and colour chart
- TremGlaze S500+ data sheet Tremco, PDF
- TremGlaze colour chart Tremco, PDF, the whole TremGlaze range